CAT5 VGA KVM Extender, 1080p@200M, RGB Skew Correction, Single Station Dual Console, Mask Hotkey Unit Cascading, EXC-2021
EXC-2021 = EXC-201S (Console) + EXC-021P (PC)
CAT5 VGA KVM Extender, EXC-2021, consists of a Console and a Computer unit that allows you to extend VGA and USB signals up to 200 meters (656 foot) over CATx Cabling. Allow two users to share one computer both in local and remote areas. Unique design for RGB skew/ Equalizer (sharpness) / gain (brightness) adjustment via hotkeys are applicable for the best video quality.
Video Adjustment
To compensate the lengths of CAT 5 cable, there 16 levels on coarse tune and up to 128/256 scales on fine tune are available for adjustment on the equalizer and gain. And, there are 8 levels on coarse tune and 16/32 scales on fine tune are available for skew adjustment on blue, green and red.
Privacy Setting
Users can temporarily disable the video output signal of the Computer Unit and protect the privacy for 5/15/30/60 seconds
Dual-User Access
Dual Console function allows two users (Local and Remote sides) to share one computer. The local console EXC-021P enables users to access the computer directly, while the remote console EXC-201S allows users to remotely control the computer as if you were sitting right in front of it. Hotkey functions and push buttons enable the user at Console/ PC Unit to exclusively access the computer.
Cascade Configuration: The dedicated Mask Hotkey function
CAT5 VGA KVM Extender, EXC-2021 Mask Hotkey Switch located at the rear panel of both Console Unit and Computer Unit can be slid OFF/ON to switch hotkey control between the Computer (Default setting) and KVM Switch (Cascading) accordingly.
The hotkey commands of KVM Switches vary among models, which may cause hotkey errors, unwanted configurations between the Extender Unit and the mixed types of KVM Switches that connect to each other. To prevent from any conflict via hotkey commands in the cascade configuration, Hotkey Mask feature eliminates or simplifies all the hotkey control barriers caused by mixed combinations of KVM Extender and KVM Switch in cascading architecture; through the mask ON, users can bypass the Extender Unit and directly apply the KVM Switch’s built-in hotkey commands to access and configure the KVM Switch. You can easily expand the computers control by adding the Extender with KVM Switch.
